REF |
PART # |
DESCRIPTION |
1 |
RC1-6652 |
Drawer connector holder - This is
the connector holder for Tray 3, where the electrical connections
are made between the printer and Tray 3 - Black plastic |
2 |
RC1-6653 |
Drawer holder - Sheet metal piece
that holds the connector for the fuser - Left side of printer |
3 |
RC1-6681 |
Cable guide - Fuser cable housing -
Located in upper left side of printer |
4 |
RC1-6700 |
Switch link arm - Connects the
on/off switch on the right side door to the actual switch on the
LVPS - Metal rod link |
5 |
RC1-6772 |
Flat cable guide - Located on the
bottom of the printer and help guide flat cables from the Driver
PCA, Memory board, and the Tray 2 media sensor up to the DC
Controller PCA - This is the guide on the right rear side of
printer |
6 |
RC1-6773 |
Flat cable guide - Located on the
bottom of the printer and help guide flat cables from the Driver
PCA, Memory board, and the Tray 2 media sensor up to the DC
Controller PCA - This is the guide on the left rear side of
printer |
7 |
RC1-6825 |
Cable guard - Protects the cables
(non-flat type) from being pinched between PC boards and sheet
metal on upper left side of printer |
8 |
RC1-7551 |
Left rear bracket - This is the
sheet metal box that supports the Low Voltage Power Supply so the
top cover fits |
9 |
WP2-5214 |
Temperature sensor - Also referred
to as environment sensor |
10 |
RM1-2595 |
Temperature sensor cable - Connects
environment sensor to DC controller board |
11 |
RM1-2608 |
Electrostatic Transfer Belt (ETB)
cable - Connects Driver PC board to ETB |
12 |
RM1-2610 |
Drum motor cable - Connects
cartridge drive motors M6 and M7 to Driver PCA |
13 |
RM1-2611 |
Solenoid and motor cable - Connects
CST pickup and MP Tray pickup solenoids to Driver PCA - Also
connects feed motor M4 to Driver PCA |
14 |
RM1-2613 |
Cassette feeder cable - Connects
Driver PCA to 500 sheet paper feeder PCA |
15 |
RM1-2629 |
Drum motor cable - Connects
cartridge drive motors M8 and M9 to Driver PCA - For Color
LaserJet 3000 only |
16 |
RM1-2628 |
Paper full cable - From Driver PCA
to connector J821 |
17 |
RM1-2597 |
Fuser cable - Connects Fuser to DC
controller and Low Voltage power supply |
18 |
RM1-2605 |
Driver cable - From DC Controller
board to Driver board |
19 |
RM1-2640 |
Laser/scanner assembly - For Color
LaserJet 3000 only |