REF |
PART # |
DESCRIPTION |
1 |
RG5-6180 |
Intermediate transfer belt assembly
(ITB) |
2 |
RB2-5570 |
Door dampener hinge mount - Left
side/fuser door dampener mount (two used) |
3 |
RG9-1595 |
Paper guide assembly before fuser -
Rear portion of fuser entry paper guide assembly |
4 |
RG9-1596 |
Fuser front guide assembly - Front
portion of fuser paper entry guide - Part of guide with blue
handle |
5 |
RS6-2442 |
Tension spring - Provides tension
for big green handle on front of printer |
6 |
WG8-5362 |
Photo-sensor (TLP1241) - Sensor flag
activated - For sensing media length when documents are placed in
the ADF input tray (PS7 long paper sensor and PS8 short paper
sensor) and the scanner home position sensor (PS5) (three used) |
7 |
RG5-7889 |
Fuser sensor PC board - Mounts on a
support bracket inside the print engine frame assembly |
8 |
RG5-5925 |
Fuser connecting cable assembly -
Cable with large black main connector for fusing assembly |
9 |
RG5-5932 |
Fusing sensor cable assembly -
Connects to Fuser sensor PC Board |
10 |
RB2-7376 |
Feed guide - Mounts to the bottom of
the delivery feed assembly on the left side of the printer |
11 |
RG5-6190 |
Delivery feed assembly - Moves paper
to the output tray after the fusing assembly - Mounts on the left
side of print engine frame assembly |
12 |
RG5-6018 |
Fuser drive assembly - Includes the
two support plates, drive gears, and 24VDC motor (M10) |
13 |
RG5-6098 |
Fuser assembly - Bonds toner to
paper with heat - This part covers both 110VAC and 220VAC machines |